MEC Bushing Chart
Winchester Shotshell Powder

The bushing chart does not represent recommended weights of charge. It is intended as a guide only to show the relationship of the volumetric capacity to the various bushings.

Bushing #	Super HCP	WAA Lite	Super Target	296	Super Field
10	10.5	7.5	7.9	13.7	10.9
11	11.2	8.0	8.3	14.6	11.5
12	11.8	8.4	8.8	15.4	12.2
12A	12.5	9.1	9.3	16.3	12.9
13	13.3	9.8	9.8	17.2	13.6
13A	14.0	10.2	10.4	18.1	14.3
14	14.7	10.6	10.9	19.0	15.0
15	15.5	11.2	11.4	20.0	15.8
16	16.2	11.8	12.0	21.0	16.6
17	17.1	12.3	12.6	22.0	17.4
18	18.0	12.7	13.2	23.0	18.2
19	18.8	13.3	13.8	24.1	19.0
Bushing #	Super HCP	WAA Lite	Super Target	296	Super Field
20	19.6	13.9	14.4	25.1	19.9
21	20.7	14.6	15.0	26.2	20.8
22	21.7	15.4	15.7	27.4	21.6
23	22.5	15.9	16.3	28.5	22.6
24	23.2	16.5	17.0	29.7	23.5
25	24.1	17.2	17.7	30.9	24.4
26	25.0	17.9	18.4	32.1	25.4
27	25.9	18.6	19.1	33.4	26.4
28	26.7	19.3	19.8	34.6	27.4
29	27.8	20.0	20.6	35.9	28.4
Bushing #	Super HCP	WAA Lite	Super Target	296	Super Field
30	28.8	20.7	21.3	37.3	29.5
31	30.0	21.4	22.1	38.6	30.5
32	31.2	22.1	22.9	40.0	31.6
33	31.9	22.7	23.7	41.4	32.7
34	32.6	23.3	24.5	42.8	33.8
35	33.9	24.3	25.3	44.2	35.0
36	35.2	25.4	26.2	45.7	36.1
37	36.7	26.3	27.0	47.1	37.3
38	38.3	27.3	27.9	48.7	38.5
38A	39.4	28.1	28.8	50.2	39.7
39	40.6	28.9	29.7	51.7	40.9
39A	41.7	29.7	30.6	53.3	42.2
Bushing #	Super HCP	WAA Lite	Super Target	296	Super Field
40	42.8	30.6	31.5	54.9	43.4
40A	44.1	31.6	32.4	56.6	44.7
41	45.5	32.7	33.4	58.2	46.0
41A	46.8	33.7	34.3	59.9	47.4
42	48.1	34.8	35.3	61.6	48.7
42A	49.6	35.6	36.3	63.3	50.1
43	51.1	36.5	37.3	65.0	51.5
43A	52.5	37.3	38.3	66.8	52.9
44	54.0	38.2	39.3	68.6	54.3
44A	55.3	39.2	40.4	70.4	55.7
45	56.6	40.2	41.4	72.3	57.2
45A	57.8	41.2	42.5	74.1	58.6
46	59.1	42.2	43.6	76.0	60.1

NOTE: The amount of powder thrown by bushings was calculated using single-stage reloaders. Single-stage machines will usually throw heavier charges than progressive reloading machines. Please verify powder loads by using an accurate scale. Compatible Components Primers, wads, powder charge and weight of the shot charge must be in accordance with the manufacturer's specifications. Handloader guides are available from the component manufacturer or possibly from your source of reloading components. We recommend that you use the data listed in the handloader guides. Because we have no control over the type, quality, or quantity of components used, we assume no responsibility relative to your reloading or finished shells. Handloader guides are available from: Winchester Powder 6231 Robinson Street Shawnee Mission, KS 66202

http://www.wwpowder.com