MEC Bushing Chart
Hodgdon Shotshell Powder

The bushing chart does not represent recommended weights of charge. It is intended as a guide only to show the relationship of the volumetric capacity to the various bushings.

Bushing #	HS6	HS7	H110	Clays	International Clays	Universal Clays	Longshot	TiteWad	Lil Gun
7	----	----	----	----	----	----	----	----	12.1
8	----	----	----	----	----	----	----	----	12.6
9	----	----	----	----	----	----	----	----	13.1
10	12.6	13.4	14.2	6.3	7.2	8.3	11.8	7.9	13.6
11	13.4	14.2	15.0	6.7	7.6	8.8	12.5	8.3	14.5
12	14.2	15.0	15.8	7.0	8.1	9.3	13.3	8.8	15.3
12A	15.0	15.8	16.7	7.4	8.6	9.9	14.0	9.3	16.2
13	15.8	16.7	17.6	7.8	9.1	10.4	14.8	9.8	17.1
13A	16.7	17.6	18.5	8.2	9.6	11.0	15.6	10.4	18.0
14	17.6	18.5	19.5	8.6	10.1	11.6	16.4	10.9	18.9
15	18.5	19.5	20.4	9.1	10.6	12.2	17.2	11.4	19.9
16	19.5	20.4	21.4	9.5	11.1	12.9	18.1	12.0	20.9
17	20.4	21.4	22.4	9.9	11.7	13.5	18.9	12.6	21.9
18	21.4	22.4	23.4	10.4	12.3	14.2	19.8	13.2	22.9
19	22.4	23.4	24.5	10.9	12.8	14.8	20.7	13.8	24.0
Bushing #	HS6	HS7	H110	Clays	International Clays	Universal Clays	Longshot	TiteWad	Lil Gun
20	23.4	24.5	25.6	11.4	13.4	15.5	21.7	14.4	25.0
21	24.5	25.6	26.7	11.8	14.0	16.2	22.6	15.0	26.1
22	25.6	26.7	27.8	12.3	14.6	17.0	23.6	15.7	27.3
23	26.7	27.8	28.9	12.9	15.3	17.7	24.6	16.3	28.4
24	27.8	28.9	30.1	13.4	15.9	18.4	25.6	17.0	29.6
25	28.9	30.1	31.3	13.9	16.6	19.2	26.6	17.7	30.8
26	30.1	31.3	32.5	14.5	17.2	19.7	27.7	18.4	32.0
27	31.3	32.5	33.8	15.0	17.9	20.8	28.8	19.1	33.3
28	32.5	33.8	35.0	15.6	18.6	21.6	29.9	19.8	34.5
29	33.8	35.0	36.3	16.2	19.3	22.4	31.0	20.6	35.8
Bushing #	HS6	HS7	H110	Clays	International Clays	Universal Clays	Longshot	TiteWad	Lil Gun
30	35.0	36.3	37.6	16.7	20.0	23.3	32.1	21.3	37.2
31	36.3	37.6	38.9	17.3	20.8	24.1	33.3	22.1	38.5
32	37.6	38.9	40.3	17.9	21.5	25.0	34.5	22.9	39.9
33	38.9	40.3	41.7	18.6	22.3	25.9	35.7	23.7	41.3
34	40.3	41.7	43.1	19.2	23.0	26.8	36.9	24.5	42.7
35	41.7	43.1	44.5	19.8	23.8	27.7	38.1	25.3	44.1
36	43.1	44.5	45.9	20.5	24.6	28.6	39.4	26.2	45.6
37	44.5	45.9	47.4	21.1	25.4	29.6	40.7	27.0	47.0
38	45.9	47.4	48.9	21.8	26.3	30.6	42.0	27.9	48.6
38A	47.4	48.9	50.4	22.5	27.1	31.5	43.3	28.8	50.1
39	48.9	50.4	52.0	23.2	28.0	32.5	44.6	29.7	51.6
39A	50.4	52.0	53.5	23.9	28.8	33.5	46.0	30.6	53.2
Bushing #	HS6	HS7	H110	Clays	International Clays	Universal Clays	Longshot	TiteWad	Lil Gun
40	52.0	53.5	55.1	24.6	29.7	34.5	47.4	31.5	54.8
40A	53.5	55.1	56.7	25.3	30.6	35.4	48.8	32.4	56.5
41	55.1	56.7	58.4	26.0	31.5	36.6	50.2	33.4	58.1
41A	56.7	58.4	60.0	26.8	32.4	37.7	51.6	34.3	59.8
42	58.4	60.0	61.7	27.5	33.3	38.8	53.1	35.3	61.5
42A	60.0	61.7	63.4	28.3	34.3	39.9	54.6	36.3	63.2
43	61.7	63.4	65.1	29.1	35.2	41.0	56.1	37.3	64.9
43A	63.4	65.1	66.9	29.9	36.2	42.1	57.6	38.3	66.7
44	65.1	66.9	68.6	30.7	37.2	43.2	59.2	39.3	68.5
44A	66.9	68.6	70.4	31.5	38.2	44.4	60.7	40.4	70.3
45	68.6	70.4	72.3	32.3	39.2	45.6	62.3	41.4	----
45A	70.4	72.3	74.1	33.1	40.2	46.8	63.9	42.5	----
46	72.3	74.1	75.1	33.9	41.2	48.0	65.6	43.6	----

NOTE: The amount of powder thrown by bushings was calculated using single-stage reloaders. Single-stage machines will usually throw heavier charges than progressive reloading machines. Please verify powder loads by using an accurate scale. Compatible Components Primers, wads, powder charge and weight of the shot charge must be in accordance with the manufacturer's specifications. Handloader guides are available from the component manufacturer or possibly from your source of reloading components. We recommend that you use the data listed in the handloader guides. Because we have no control over the type, quality, or quantity of components used, we assume no responsibility relative to your reloading or finished shells. Handloader guides are available from: Hodgdon Powder Co. Inc. 6231 Robinson Street Shawnee Mission KS 66202 (913) 362-9455 http://www.hodgdon.com